Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN 180° high-performance drill, SC TiAlN, 5xD 3.1 mm x 6 mm x 66 mm

ATORN 180° high-performance drill, SC TiAlN, 5xD 3.1 mm x 6 mm x 66 mm

ATORN 180° high-performance drill, SC TiAlN, 5xD 3.1 mm x 6 mm x 66 mm
Bild
Bild
Bild
Bild
Bild
Item no: 1011100 108 

Online price:

Still in stock: 3

Application
For producing drill holes with a 180° hole base in one operation

Execution
Heavy-duty solid carbide drill with 180° precision grinding and drill heels

Advantage
  • drilling and counterboring in a single work step at high cutting speed
  • Innovative geometry ensures good chip removal

Notes
The maximum permissible inclination of the drilling surface is 15° correction factor = 0.25
For spot drilling, multiply feed f [mm/U] by correction factor Kf
  • Spot drill with reduced feed until the tool cuts to 0.25xD over the total ø

  • For angled spot drilling: Retract at double feed rate f [mm/U]

  • After spot drilling at reduced feed rate (correction factor), drilling continues at feed rate f [mm/U] according to recommended cutting data without correction factors

  • Setting a pilot hole is recommended for drilling on flat surfaces.


Brand: ATORN
Material to be processed: Universal use
Cutting material: SC
Surface: TiAlN
Max. drilling depth (D): 5xD
Angle of the tip: 180 Degree
Coolant supply: Internal
Tool holding device: HA parallel shank
Cutting edge diameter: 3,1 mm
Shank diameter: 6 mm
Chip flute length: 28 mm
Length: 66 mm
f steel 1000: 0,08 mm/r
Edge protection chamfer length: 0,16 mm

ATORN-No.: 12040472

EAN no.: 4050293447019

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • ATORN 180° high-performance drill, SC TiAlN, 5xD 3.3 mm x 6 mm x 66 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.0 mm x 6 mm x 66 mm
  •
    Digitale Messuhr 12,5 mm/0,0005 mm 1086 WR
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.4 mm x 6 mm x 66 mm
  •
    ATORN solid carbide end mill Z2 HB shaft diameter 20.0 x 38 x 104 mm
  •
    Annular cutter QuickIN HSS cutting depth 35 mm for KBM 65Q/F+65/F dia. 28 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.5 mm x 6 mm x 66 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.7 mm x 6 mm x 66 mm
  •
    ATORN 180° high-performance drill, SC TiAlN, 5xD 3.2 mm x 6 mm x 66 mm
  •
    End roughing mill cyl. DIN 844 B type HR long 5 cutting edges HSS-E/TiAlN 22 mm
    146,66 €
  • End roughing mill cyl. DIN 844 B type HR long 6 cutting edges HSS-E/TiAlN 30 mm
    252,32 €
  • End roughing mill cyl. DIN 844 B type HR long 4 cutting edges HSS-E/TiAlN 12 mm
    55,69 €
Herstellerinformationen