KISLING ERGO - ergo activator for faster hardening of superglues 150 g

Application
Zur Erhöhung der Aushärtegeschwindigkeit von Sekundenklebstoffen.
Wenn die Aushärtung durch Faktoren, wie z.B. zu großer Klebspalt, poröse oder saure Oberfläche verzögert oder gestört wird, ist der Einsatz des Aktivators ergo® 5100 empfehlenswert.
Der Aktivator wird dann auf die poröse bzw. inaktivere Oberfläche auftragen. Nach Ablüftung des Lösungsmittels kann der Klebstoff auf das 2. Bauteil aufgetragen werden.

Execution

Accelerates the hardening process
Use of the activator is recommended especially for unfavourable porous, inactive (acidic), non-polar surfaces or large bonding gaps
In this case, the product is applied on one side (to the porous, inactive surface) before bonding
ergo. cyanoacrylate adhesives are cyanoacrylic acid ester-based one-component products that harden under the influence of humidity
ergo. cyanoacrylates are mainly used for bonding plastics, elastomers and metals
The main advantages of these modern adhesives are the curing speed, ease of application and good mechanical strength of the bonds
In principle, ergo. cyanoacrylate adhesives can be used in a temperature range from -55 °C to +120 °C (depending on the type)
Activator ergo® 5100 is applied at least 2 minutes prior to the adhesive, usually to one side, and must be completely dry before the parts are joined. It takes 60-120 seconds to dry

Notes
Cyanoacrylate vapours can irritate the mucous membranes and eyes. It is therefore advisable to ensure good ventilation/extraction at the workplace and to wear protective gloves (not cotton) and safety goggles. Cyanoacrylate glues skin and eyelids together within seconds. Keep out of the reach of children. Please contact us if you would like the corresponding safety data sheet and technical data sheet. Please observe the additional information on the containers.

ergo activator for faster hardening of superglues 150 g

ergo activator for faster hardening of superglues 150 g

Description

Technical data

More details

Often bought together

ergo superglue 5011 universal for wood, metal, rubber etc. 20 g

ergo threadlocker 4052 medium-strength 50 g

ergo pipe thread sealant type 4207 anaerobic 50 g

ergo superglue gel, type 5039 for wood, metal, stone, ceramics etc. 20 g

Cyanoacrylate adhesive 5925 universal, quick-hardening, low-viscosity 20 g

LOCTITE 401 instant adhesive 3 g

ergo threadlocker 4101 high-strngth 50 g

ergo superglue adhesive 5011 SmartPen wood metal 30 g

LOCTITE 243 threadlocker 10 g

ergo hydraulic sealant type 4202 medium-strength 50 g

No workshop should be without it:

T-handle 411 A RA T-handle

Free-hand cutting disc, straight, universal line PSF STEELOX grit 60 125x1.0 mm

ATORN countersink set, 90°, unequal spiral pitch 6.3-25.0 mm, 3-flat shank

ATORN A-Mech 22 assembly glove, size 9

Adapter set 958/7

Industrial atomiser type R36.501 with 360° suction system

ATORN A-View 1 safety glasses

ATORN A-View 5 full-vision safety goggles

ATORN A-Shield 4 cut protection glove, size 9

ATORN 6-piece measuring instrument set, wooden case, digital vernier callipers

Pliers set, 3 pcs comb. pliers, side cutters, high-tech water pump pliers

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10 mm 0.5 in box

ATORN ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch

ATORN A-Mech 4 assembly glove, size 9

ATORN hexagon screwdriver set, ball head set, 5 pieces, 3–8 mm

Protective vice jaw set 125 mm 8 pieces in bag

Tabletop scales type FCE 15 K5 w/LC display reading 5g max. weighing range 15kg

Multiclean cleaning cloth roll 1000 pcs 34x37 cm 2 ply blue perforated absorbent

WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade

Pneumatic hose reel hose dia. 13 mm, hose length 15 m max. 20 bar

Lamella flap disc LSZ-F Vision zirconia alumina grain 60 dia. 125 mm

Long hexagon ball head pin wrench set 9 pcs in clip AF 1.5/2/2.5/3/4/5/6/8/10

ATORN cutter blade with 18-mm snap-off blade, metal housing, with slide

ATORN A-Mech 2 assembly glove, size 9

T-handle 416 RA T-handle Rapidaptor

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

ATORN dial gauge, 10 mm meas. diff. 0.01 mm graduation shock-res, dia. 58 mm

Caramba high-performance PTFE 500 ml spray can

ATORN reusable corded ear plugs

Set of flat hand engineer's files with handle, 5 pieces, L=200mm, German cut 2

ATORN disposable ear plugs, 400 pairs

Cs. + cs. deburring tool set 6 pcs 90° HSS dia. 6.3-20.5 mm in plastic box

ATORN cross-peen hammer 1,000 g, hickory handle, nylon handle protect. sleeve

3D art. meas. stand with central clamping and micro fine adj., height 390 mm

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-13 mm 0.5 and CHD

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 and CHD

ATORN centre drill set HSSE TiALN form A, D=1-1.6-2-2.5-3.15-4-5

ErgoStrip universal stripping tool 0.2-4.0 mm length 135 mm right-handed

ATORN corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m

ATORN analogue scriber 600 mm with fine adjustment

LOCTITE LB 8040 rapid rust remover 400 ml

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

ATORN countersink set, 90°, HSS, extremely unequal pitch 6.3-20.5mm, 3-flat shnk

ATORN micrometer 0-25 mm, in case

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10 mm 0.5 in box

ATORN vernier calipers IP67 electr. 150 mm depth gauge flat

Wire-stripping pliers PreciStrip16 type 12 52 195

ATORN A-Mech 1 assembly glove, size 9

ATORN HSSE machine tap set M3-12 HSSE GL

KNIPEX precision circlip pliers set, 8 pieces in box

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 in box

Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces

ATORN centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10 mm 0.5 in box

ATORN bit socket wrench set, 6 pieces, hexagon head

LOCTITE 243 threadlocker 50 g

ATORN connector set, 3 pieces, square output

Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale

ATORN try square stainless 150 x 100 mm in line with DIN 875 precision 1

ATORN LED magnifying lamp, 5 dioptres, 2-stage segment switching, 2.25x

Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.

Kegelsenker-Satz 90° HSS-TiAlN Form C ungl. Teilung 3 Spannflächen Ø 6,3-20,5 mm

ATORN centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5