Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN high-perf. drill, SC TiAlN 180° 3xD 4 mm x 6 mm x 66 mm

ATORN high-perf. drill, SC TiAlN 180° 3xD 4 mm x 6 mm x 66 mm

ATORN high-perf. drill, SC TiAlN 180° 3xD 4 mm x 6 mm x 66 mm
Bild
Bild
Bild
Bild
Bild
Bild
Item no: 1011099 110 

Online price:

Still in stock: 5

Application
For producing drill holes with a 180° hole base in one operation

Execution
Heavy-duty solid carbide drill with 180° precision grinding and drill heels

Advantage
  • Drilling and sinking in a single work step at high cutting speed
  • Innovative geometry ensures good chip removal

Notes
The maximum permissible inclination of the drilling surface is 45°
inclination up to 15° correction factor = 0.50
inclination up to 30° correction factor = 0.40
inclination up to 45° correction factor = 0.25
For spot drilling, multiply feed f [mm/r] by correction factor Cf
  • Spot drill with reduced feed until the tool cuts to 0.25xD over the total ø

  • For angled spot drilling: Retract at double feed rate f [mm/r]

  • After spot drilling at reduced feed rate (correction factor), drilling continues at feed rate f [mm/r] according to recommended cutting data without correction factors


Brand: ATORN
Material to be processed: Steel | Stainless steel | Non-ferrous metal | Cast metal
Cutting material: SC
Surface: TiAlN
Max. drilling depth (D): 3xD
Angle of the tip: 180 Degree
Coolant supply: Internal
Tool holding device: HA parallel shank
Cutting edge diameter: 4 mm
Shank diameter: 6 mm
Chip flute length: 24 mm
Length: 66 mm
f steel 1000: 0,08 mm/r
Edge protection chamfer length: 0,2 mm

ATORN-No.: 12040871

EAN no.: 4050293693317

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • ATORN cutting insert for cutting off, T3, right, 2.5mm x 6.4mm 20mm, right
  •
    ATORN cutting insert for cutting off, T3, right, 1.8mm x 6.4mm 20mm, right
    30,85 €
  • ATORN high-perf. drill, SC TiAlN 180° 3xD 5 mm x 6 mm x 66 mm
    78,32 €
  • ATORN cutting insert for cutting off, T3, right, 3.0mm x 6.4mm 20mm, right
  •
    ATORN cutting insert for cutting off, T3, right, 1.0mm x 5.4mm 19mm, right
    30,85 €
  • ATORN end mill PM TiAlN, teeth = 4, 18.0 mm, type HR, DIN 1835B long shank
  •
    ATORN end mill PM TiAlN, teeth = 5, 25.0 mm, type HR, DIN 1835B long shank
  •
    Milled file, flat, DIN 7264 A medium serration 2 length 250 mm
  •
    ATORN cutting insert for cutting off, T3, right, 2.0mm x 6.4mm 20mm, right
    30,85 €
  • ATORN cutting insert for cutting off, T3, right, 1.5mm x 6.4mm 20mm, right
    30,85 €
  • ATORN end mill PM TiAlN, teeth = 4, 10.0 mm, type HR, DIN 1835B long shank
  •
    ATORN SC torus mill. cutt. w HA shank, diameter 10.0x11x100 mm, T=2, radius 1.0
Herstellerinformationen