Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN test pin set rust- and acid-resistant TC1 3.01-4.0mm, in 0.01mm increments

ATORN test pin set rust- and acid-resistant TC1 3.01-4.0mm, in 0.01mm increments

ATORN test pin set rust- and acid-resistant TC1 3.01-4.0mm, in 0.01mm increments
Item no: 1032643 206 

Online price:

Still in stock: 2

Application
For measuring bore spacings, bore diameters, angularity of bores etc.

Execution
  • ground and lapped
  • hardened 58-62 HRC
  • Rust- and acid-resistant steel
  • Diameter from 0.300 to 0.999 mm with a length of 40 mm; diameter from 1.000 mm with a length of 70 mm
  • diameter from 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
  • diameter from 1.5 to 2.999 mm: One end with 30-45° chamfer; other end deburred with diameter marking on outer surface
  • diameter from 1.00 to 1.499 mm: One end with 30-45° chamfer; other end deburred without diameter marking
  • up to 0.999 mm: Both ends deburred, without diameter marking


Brand: ATORN
Min./max. diameter: 3.01-4.00 mm
Tolerance class: 1
Material: Stainless and acid proof steel
Length: 70 mm
Type: in 0.01 mm increments
Number of pieces in assortment/set: 100 PCS
Nominal dimension of measuring pins: 3.01-4.00 mm, increasing by 0.01 mm
Number of bins: 1
DIN: 2269

ATORN-No.: 33061288

EAN no.: 4066107103019

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN test pin set rust- and acid-resistant TC1 4.01-5.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 2.01-3.0mm, in 0.01mm increments
  •
    Int. prec. m. instr. set type SVS carb. m. pin MR 18-160mm MR blnd hole 20-140mm
    3.200,56 €
  • ATORN test pin set rust- and acid-resistant TC1 9.01-10.0mm in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 7.01-8.0mm, in 0.01mm increments
  •
    Feeler gauge spring steel conical in cutting edge 20 blades L=100 mm 0.05-2 mm
  •
    Carbide thermic drill bit Flowdrill standard short dia. 1.8 mm M2 with collar
  •
    ATORN pendulum jaw for screwing on to grip jaws
    288,12 €
  • ATORN test pin set rust- and acid-resistant TC1 5.01-6.0mm, in 0.01mm increments
  •
    Reducing ring for sanding disc, outer dia. 32 mm, inner dia. 16 mm
  •
    ATORN machine tap HSSE VA, 6HX, 45 degrees, form C, M30
  •
    Collet chuck DIN 6499, GER40-HP/472E, DxL=41x46mm, drill hole 10.0mm
Herstellerinformationen