Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN test pin set rust- and acid-resistant TC1 5.01-6.0mm, in 0.01mm increments

ATORN test pin set rust- and acid-resistant TC1 5.01-6.0mm, in 0.01mm increments

ATORN test pin set rust- and acid-resistant TC1 5.01-6.0mm, in 0.01mm increments
Item no: 1032643 208 

Online price:

Still in stock: 2

Application
For measuring bore spacings, bore diameters, angularity of bores etc.

Execution
  • ground and lapped
  • hardened 58-62 HRC
  • Rust- and acid-resistant steel
  • Diameter from 0.300 to 0.999 mm with a length of 40 mm; diameter from 1.000 mm with a length of 70 mm
  • diameter from 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
  • diameter from 1.5 to 2.999 mm: One end with 30-45° chamfer; other end deburred with diameter marking on outer surface
  • diameter from 1.00 to 1.499 mm: One end with 30-45° chamfer; other end deburred without diameter marking
  • up to 0.999 mm: Both ends deburred, without diameter marking


Brand: ATORN
Min./max. diameter: 5.01-6.00 mm
Tolerance class: 1
Material: Stainless and acid proof steel
Length: 70 mm
Type: in 0.01 mm increments
Number of pieces in assortment/set: 100 PCS
Nominal dimension of measuring pins: 5.01-6.00 mm, increasing by 0.01 mm
Number of bins: 1
DIN: 2269

ATORN-No.: 33061290

EAN no.: 4066107103033

Product Datasheet
Versions
loading
Keywords:

You might also be interested in this

  • ATORN test pin set rust- and acid-resistant TC1 7.01-8.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 2.01-3.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 3.01-4.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 6.01-7.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 8.01-9.0mm, in 0.01mm increments
  •
    ATORN test pin set rust- and acid-resistant TC1 4.01-5.0mm, in 0.01mm increments
  •
    Feeler gauge spring steel conical in cutting edge 20 blades L=100 mm 0.05-1 mm
  •
    Hexagon pin wrench long similar to ISO 2936L arm length 67 x 6 mm AF 0.7 mm
  •
    ATORN test pin set rust- and acid-resistant TC1 9.01-10.0mm in 0.01mm increments
  •
    Feeler gauge spring steel conical in cutting edge 20 blades L=100 mm 0.05-2 mm
  •
    ATORN flat square 300 x 200 mm in line with DIN 875 precision 1
  •
    ATORN wire end brush/miniature brush steel wire 0.10 5x2.34
Herstellerinformationen