RAKSO - Wire wool grade of fineness coarse 5

Application
Wood: For sanding after priming and before applying the first paint layer. The natural grain pattern is greatly enhanced on textured woods.
Paint: Removes old paint layers from antique furniture in combination with paint stripper. Roughens old painted surfaces before applying new paint.
Metal: Cleans copper pipes and copper fittings before soldering. Removes stubborn dirt, surface rust, oil contamination and limescale deposits.
Cleaning: Ideal for removing dirt from garden furniture and blinds. Glass blocks and tiles are effectively cleaned without scratching.

Execution

Fine types numbers 0000, 000 and 00 can be used to smooth wood after staining, spruce up waxed woods with new wax, thoroughly and gently clean plastic blinds and garden furniture and polish aluminium, copper and brass
Medium types numbers 0, 1 and 2 can be used to smooth wood after priming, remove old paints using solvents, sand plasterboard, remove dirt residues from tiles and stone flooring and polish copper piping and fittings before soldering
Coarser types numbers 3, 4 and 5 can be used to enhance natural grain patterns in softwoods (pine, spruce), clean glazing and glass blocks and roughen old paint and coatings
Stark verschmutzte Oberflächen:
Zum Entfernen von Fett oder Öl von Oberflächen, besonders bei hartnäckigen Verschmutzungen.
Reinigung von Glasoberflächen / Fenstern:
Zur Beseitigung von hartnäckigen Ablagerungen wie Rost, Mineralien oder Schmutz von Glas.
ACHTUNG: Hierbei sollte jedoch eine sehr feine Stahlwolle (ab der Feinheitsgrad gelb 00) verwendet werden, um das Glas nicht zu zerkratzen.

Advantage
RAKSO STEEL WOOL is available in nine varieties with a clear colour coding system: YELLOW is for fine types, ORANGE for medium types and RED for coarser types.

Notes
Beim Arbeiten mit Stahlwolle sind Schutzhandschuhe zu verwenden, da die feinen Drähte kleine Hautverletzungen verursachen können.
Zudem sollte man bei der Verwendung in feuchten Umgebungen darauf achten, dass keine Rostbildung auftritt, wenn die Stahlwolle in Kontakt mit Wasser kommt.

Wire wool grade of fineness coarse 5

Wire wool grade of fineness coarse 5

Description

Technical data

More details

Additional articles

Versions

Often bought together

Sanding sponge siasponge block hard fineness coarse 98x69x26 mm

Sanding sponge 4-sided corundum grain 100 fine 68x100x26 mm

Sanding sponge medium grit/P60 90x100x5 aluminium oxide

Sanding sponge siasponge flex pad medium 120x98x13 mm

Sanding sponge siasponge combination block hard fineness fine 98x69x26 mm

Universal sanding block elast. rubber silicone-free gr. 60 coarse 80x50x20 mm

Sanding sponge siasponge block hard comb. fineness medium 98x69x26 mm

No workshop should be without it:

Measuring cup set 3 pcs 0.5 l, 1.0 l, 2.0 l, transparent, coloured/raised scale

ATORN A-Shield 1 cut protection glove, size 9

LOCTITE LB 8040 rapid rust remover 400 ml

Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.

ATORN bit socket wrench set, 6 pieces, hexagon head

Octagonal pin punch set 6 pieces dia. 2-8 mm in stand

ATORN reusable corded ear plugs

ATORN wooden folding rule, white 2 m EC class III, with angle scale

ATORN dial gauge, 10 mm meas. diff. 0.01 mm graduation shock-res, dia. 58 mm

Pneumatic special oil 100 ml silicone-free with locking cap

Inspektionskamera VideoPocket HD

TX® screwdriver set 9 pieces T10-50

T-handle 411 A RA T-handle

ATORN centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10.5 mm 0.5 and CHD

ATORN banded ear plugs, 32 dB

ATORN connector set, 3 pieces, square output

Protective vice jaw set 125 mm 8 pieces in bag

ErgoStrip universal stripping tool 0.2-4.0 mm length 135 mm right-handed

ATORN A-View 4 safety glasses

ATORN hexagon screwdriver set, 9 pieces, 1.5–10 mm, with ball head, long

Industrial atomiser type R36.501 with 360° suction system

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

Pneumatic hose reel hose dia. 13 mm, hose length 15 m max. 20 bar

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10.5 mm 0.5 and CHD

ATORN A-Shield 4 cut protection glove, size 9

ATORN LED magnifying lamp, 5 dioptres, 2-stage segment switching, 2.25x

Funnel set 6 pieces dia. 50, 75, 100, 120, 150, 160 mm polyethylene

ATORN cutter blade with 18-mm snap-off blade, metal housing, with slide

ATORN 1/4 inch hexagon socket with flexible blade

ATORN corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm

ATORN hexagonal Allen key set, 9 pieces, 1.5–10 mm, ball head, colourful

ATORN twist drill bit set STEP DRILL type N HSSE purple 1-10.5 mm 0.5 and CHD

ATORN ear defenders, 33 dB

KNIPEX precision circlip pliers set, 8 pieces in box

Profi-line intensive brake cleaner spray can 500 ml pack=15 cans

Caramba high-performance PTFE 500 ml spray can

ATORN quick-change bit holder, 1/4 inch x 60 mm

Pliers set, 3 pcs Combination pliers, snipe nose pliers, side cutters

Pliers wrench 250 mm up to AF 52 mm 19x position box joint

Taschenbandmaß 411 Vario EG I Bandbreite 13 mm Länge 3 m

ATORN HSSE machine tap set M3-12 HSSE DL

ATORN flat square, stainless 150 x 100 mm in line with DIN 875 precision 1

HHW twist drill bit set DIN 338 HSS type N dia. 1-13.0 mm in box

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6

WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade

ATORN cross-peen hammer 1,000 g with 3-component handle

T-handle 416 RA T-handle Rapidaptor

ATORN A-Mech 3 assembly glove, size 9

Hexagon screwdriver set 8 pieces 2-10 mm

3D art. meas. stand with central clamping and micro fine adj., height 390 mm

Metal saw bow for 300 mm saw blade length

Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces

ATORN A-Shield 2 cut protection glove, size 9

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-13 mm 0.5 and CHD

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm 3-flat shnk

ATORN A-Shield 3 cut protection glove, size 9

LOCTITE 243 threadlocker 50 g

ATORN vernier calipers IP67 electr. 150 mm depth gauge flat

ATORN corundum abrasive fabric sheets (AO) G100 230 x 280 mm

Adapter set 958/7